The result of the influence for center pivot irrigation machine operations on rain intensity
DOI:
https://doi.org/10.5564/pmas.v61i03.1823Keywords:
Sprinkler, nozzle, pressure regulator, irrigation, rain intensityAbstract
The impact of two parameters - the pressure regulator X1 at the nozzle and the speed of the machine X2 for the amount of water flow through the sprinkler (Y, mm) experiment were determined by 8 mm diameter nozzles. The experiment was carried out in the laboratory of “Design of Irrigation and Equipment” used by “Sprinkler’s uniformity distribution measuring equipment” at the School of Engineering and Technology of MULS. In order to determine the rain intensity of low pressure sprinkler nozzle, mathematical statistical methods was used and it was found that the maximum amount of water supplied by the sprinkler nozzle is 1.727 mm/min with a maximum pressure of 30 PSI and a minimum speed is 1 m / min with a minimum flow rate of 0.313 mm/min. At a pressure regulator value of 20 PSI, the speed was a maximum of 3 m/min.
Downloads
174
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Delgermaa Lkhagvasuren, Nuuts Yadamsuren, Otgonkhuyag Balgan , Byambadorj Chagnaadorj
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright on any research article in the Proceedings of the Mongolian Academy of Sciences is retained by the author(s).
The authors grant the Proceedings of the Mongolian Academy of Sciences a license to publish the article and identify itself as the original publisher.
Articles in the Proceedings of the Mongolian Academy of Sciences are Open Access articles published under a Creative Commons Attribution 4.0 International License CC BY.
This license permits use, distribution and reproduction in any medium, provided the original work is properly cited.
